Sustainable and livable buildings start with a foundation that minimizes construction waste, prevents pollution and is cost effective.
A single 12.5 pound roll of Fastfoot® forms the same commercial footings as 900 pounds of plywood or lumber, representing a dramatic increase in efficiency. Plywood and lumber are discarded after several reuses because of concrete damage. Fastfoot® protects screedboards and stakes from concrete damage.
The photo on the right shows a 30" wide by 16" deep grade beam for a tilt warehouse by Ram Construction in Surrey BC. Note the minimal use of lumber: 1x4 stakes, 2x4 screed boards, 1/4 cleats and Fastfoot®.
Fastfoot® is a damp proof membrane and prevents concrete toxins from contaminating sensitive ground water. With lumber footing forms, the concrete is in direct contact with the ground, and cement fines enter the groundwater, contaminating spawning and wildlife habitat.
There are seven categories where Fastfoot® contributes:
|1 - Sustainable Sites||Prereq 1||Construction Activity Pollution Prevention||With lumber footing forms, concrete is poured directly on the ground, contaminating the water table with cement toxins. With Fastfoot® the concrete is poured into a membrane, preventing all ground water contamination.|
|2 - Materials & Resources||Prereq 1||Storage & Collection of Recyclables||Lumber formed concrete footings are not environmental because of transportation, storage, and waste. Approximately 35% of lumber forms are sent to the landfill. Fabric forms are very green: 300 times lighter and 1% the space of lumber, and stay in place to prevent ground moisture entering the concrete and causing mold and health issues.|
|3 - Materials & Resources||Credit 2.1||Construction Waste Management: Divert 50% from Disposal||Fabric forms divert 100% of forming materials from disposal. Any lumber used is completely protected by Fastfoot® from concrete damage and is reused.|
|4 - Materials & Resources||Credit 8 (Canada)||Durable Building||Fastfoot® prevents rapid hydration leading to stronger and more durable concrete. Lumber forms lead to excessive drying and weaker concrete.|
|5 - Materials & Resources||Credit 8 (Canada)||Durable Building||Fastfoot® eliminates rising damp, thereby preventing the deterioration of the building structure and interior finishes from mold and dampness.|
|6 - Indoor Environmental Quality||Credit 3.1||Construction IAQ Management Plan: during Construction||Fabric forms for footings stay in place to act as a permanent membrane, preventing rising damp through the concrete and into the building interior. Elevated moisture levels are linked to mold and the proliferation of other indoor air borne pathogens that directly affect human health.|
|7 - Innovation & Design Process||Credit 1.1||Innovative Performance not specifically addressed by LEED®||Fabric formwork for concrete footings is a dramatic innovation over temporary lumber forms. This technology is not only more efficient than lumber forms, but offers ongoing benefits to the building occupants for the life of the structure.|
GreenSpec® is the highly respected green products directory produced by BuildingGreen, Inc. The company does not charge for listings or for the review process, nor do they accept advertising. As their resources are totally subscription supported, they have complete editorial independence and integrity - providing information that can be trusted.
"GreenSpec is the best resource in my collection of sustainable product
guides and I refer to it frequently for my own projects and when providing recommendations for
Grant Crosby, Historical Architect, National Park Service (Alaska Region).
The Fastfoot® membrane prevents moisture from wicking up through the concrete footing into the home. This prevents mold and fungi that grow in damp environments and can cause severe respiratory infections and allergic reactions.
Concrete is 'hygroscopic', meaning ground moisture wicks up through the footing concrete and inside the building. Fastfoot® is a vapor barrier which prevents this wicking.